Detailed Product Description

Control Unit

The microprocessor based TC-RFZ04 control unit is able to transmit 4 audio channels, featuring independent channel level control, independent channel level indicators, and independent channel outputs for sound recording.  Via a DB25 cable, multiple interpreter consoles can be connected to the control unit in a daisy-chain.  Multiple control units can be cascaded together to form a system for 16 audio channels.

RF Antenna Unit

TC-RFF02S/04S antenna unit, designed to be used for 2 or 4 operating channels, is suitable for indoor use.  Equipped with channel selection and channel locking function, the unit is powered by the control unit via a coaxial feed cable.  The antenna unit can be installed on wall or tripod stand.

RF Antenna Unit

TC-RFF02 antenna unit, designed for 2 channels, is suitable for both indoor and outdoor use.  Equipped with channel selection and channel locking function, the unit is powered by the control unit via a coaxial feed cable.  The antenna unit can be mounted on wall or tripod stand.

RF Receiver

The TC-RFJ04F/08F/12F/16F receiver is designed to be used for 4/8/12/16 audio channels, and each channel utilizes DSSS with a unique spreading code, offering CD-quality sound.  The unit is powered by a rechargeable Lithium-ion battery pack.  The selected channel number, battery level and RF signal strength are shown on LCD screen. Equipped with individual wireless RF receivers, participants can listen to any selected language channel on a personal earphone, monitor the battery status, check whether or not the unit is receiving the signal properly, and adjust volume level for comfortable listening.  Any number of receivers can be used within the effective working range. 

This receiver unit comes with a channel ID number selector, which is designed to avoid interference when multiple GONSIN DSSS systems are used at the same venue or building.

Charging/Storage Case  GX-20 

• Microprocessor-based unit w/ smart charging circuit
• Accommodates up to 20 receiver units with Li-ion battery
• DC 5V low voltage charging power
• LED indicator for charging status
• About 10 hours needed to fully recharge 20 receivers
• Receivers can be left in the case after the charge is complete
• AC/DC adaptor w/ power cord
• Power input AC100/240V 50-60Hz, output DC5V 8A
• Dimensions: 59x30x18 cm (WXDXH)